MS3 owners

[JohnnyT]

As some of you may know, I recently met with a company called GrimmSpeed (http://grimmspeed.com/) regarding a P'nP EBCS for the MS6. I just heard from their engineer they're also looking for an MS3 to do some test fitting for it as you guys have different firewalls and clearances. This meeting is only to get some measurements for the EBCS bracket.

It took an hour or so out of my day, and you're greatly helping out the community. This is going to be the first P'nP EBCS for our cars. If you're interested in product testing you will need a Standback, or an AP with a ATP tune. It'll take a few weeks to get the bracket made up, and may take a bit longer to get the plug for the EBCS.

More info is here: http://www.mazdaspeedforums.org/for...ssion-driveline/23710-gi-grimmspeed-ebcs.html

They're located in St. Paul, but I met their engineer at his place in Minneapolis as he rarely goes to the shop. I imagine you'll be doing the same.

Post here if you're interested and I'll send you the contact information.

Thanks!

 

[mndsm]

Tell me when. I may not be able to use the EBCS right away, but I'd be more than happy to let them measure it out on my car. If someone with an AP or CPE comes along and wants it, let them go ahead and take it.

 

[JohnnyT]

Do you know when you're getting your car back? I met with them within a week I knew about it, as they want to get the ball rolling on this pretty quickly (and I don't blame them as the MS3 community is far larger than the MS6's).

There's limited AP or Standback owners in MN, but at this point in time they just need a car there for measurements. Product testing will come later (hopefully looking for around 6 weeks).

 

[mndsm]

No idea on the car. I'm gonna be at MAP it sounds like on Saturday for sure, if not sooner, I'll ask em.

 

[keke]

I don't have AP or SB but they can use my car. I'm available anytime I don't work.