WTB Gauges 52mm or 60mm

[MPS_Mike]

Hey Im looking to fill a gauge pod for my MS3 the gauge pod Im getting is the CP-E Triple Gauge Pod

http://www.mazdaspeedstore.com/mazdaspeed/cp-e-Triple-Gauge-Pod-MazdaSpeed-3-Gen-1-p-596.html

Supports 52 or 60mm gauges I would prefer to glow red with a black backround, but let me know what you have.

Gauges I need AFR, Boost Gauge, open to ideas on the 3rd gauge.

Let me know Thank you!!

 

[Turbotalon1g]

I have a autometer Z-series 30-0-30 boost gauge and EGT.

 

[dmention7]

Oil pressure for the 3rd gauge. I don't have one for sale, but that's what I would recommend.

 

[mndsm]

Honestly, with an ms3 i'd go with fuel pressure before i'd do oil. Most common failure causing these cars to go kablooey is the CDFP up top- you want something to warn you if pressure suddenly goes to 0 so you can shut her down.

 

[Halon]

I have a barely used ProSport boost gauge (30-0-30 I believe). They are dark when off, white when on, and you can wire it in to turn blue when the headlights turn on. I dented the bezel on it a little, so I got a new one and have had this one sitting in my garage in the box for a couple years now.

I also believe I have a Greddy EGT gauge, white face 52mm, with sensor. It's probably about 10 years old, but still works fine. I think it also has a small dent on the bezel.

You could have em both for a case of Honey Weiss

 

[Turbotalon1g]

I also have a oil pressure and water temp dual gauge (2 in 1) and a fuel pressure & voltage (2 in 1) you can use the voltage to keep track on the voltage at the pump to see if that is your issue.