Alright, who needs an install day.

[AJ]

Is there a need to schedule BAG up for a weekend? Maybe Tom can rent the fendor roller out?

Some know, but I now have suspension and it's allready all together and just ready to bolt in. So since I don't have to do anything else with it I'm not as worried about taking it to a shop, also hoping to bribe Swanny for help on this as well

My biggest item of need, though not sure when, is going to be my roll bar install. From all accounts that's going to be a 5 hour bitch fest, though some had said 2-4 extra hands have made the process go fairly easy.

Maybe Tom needs to see if the tint pros guys want to come out again?

 

[StealthSpeed3]

I'd be open to a Tint/Install day, going to be ordering some parts here soon.

 

[niterydr]

I am there, hopefully with a new project car pending date. Most likely whatever it is could use some fender rolling + tint at a minimum.

More than willing to help out on the roll-bar install AJ.

 

[Slim]

I might be interested. I'd like to roll the MS3s fenders and I need to fix the tint in my hatch. It got messed up after some hauling long distance.

 

[mndsm]

I do have a fender roller, and I could be convinced to loan it out for a small fee.

 

[AJ]

Tom, i think you coudl make a bit of $ then, cause I need rolling as well, that's 3-4 cars off the bat.

 

[Picklz]

Keep in mind depending on how serious the amount of rolling a car needs, and how particular you are about your paint it can take a couple hours give or take an hour to do one car. It'll go a little quicker if you have the tools to have two cars on jack stands at once so as the first person is rolling the second person can get their car in the air, wheels off, etc and keep rotating.

 

[spek1098]

If this after snow melts, I have an issue or two with my suspension that I'd like to get figured out, so I'd be in.

 

[mndsm]

Matt- I also have the finisher too, so anyone that needs a flat roll, can go near flat and use the finisher to cap it off. I can pretty much do two cars at the same time that way.

 

[1Kris06]

i might need to have my fenders looked at again, passenger side especially.

 

[JohnnyT]

I don't need anything done, but I'll lend a pair of hands out.

 

[mndsm]

sounds like I need to be at this, whenever this is.

 

[AJ]

FYI, with proper planning, dending on what needs to be done 3-4 cars at one time inside isn't far off, especially if couple cars don't have anything going on and can be placed closer to a wall.

What about weekends that will work? The next two for me are out, but after that I think we can start planning things up. 4/16-4/17 will also be a no go due to the Auto X school and us having Lilli's b-day party that weekend.

 

[StealthSpeed3]

What about early May?

 

[micahlarson]

I would be down.. it would give me an excuse to dynamat my doors.. maybe put in a few new speakers and replace my head unit... that is if my new house by then hasn't sucked all the money out of me.

 

[YSOSLO]

I'd be up for this too. I need to install my Tri-point rear sway and my rears could use a fender roll.

 

[mndsm]

Ok, so let's do it like this. Whoever needs a fender roller, lemme know now. Generally rental is 50$+shipping or something like that.... and right now if I count it at about 10$ a person, I'd consider it square. I'll just make sure that if i'm not there, it gets there somehow.... I'll have the heat gun and finisher too, so all you need is a place to do it.

 

[AJ]

Is there anyone who really knows what thety are doing when rolling that would be able help the process along, especially if they where tossed a few $ as well?

 

[dmention7]

I'll probably be there helping out, and I've rolled a few fenders in my day. I don't need any payment, but I may help myself to a beer, lol.

Tom, does that woot shirt sound like adequate payment for use of your fender finisher? (since BCS is apparently no longer a viable currency, anyway...)

 

[mndsm]

Woot shirt is an acceptable medium in lieu of BCS for this transaction.